Kichler bathroom vanity lighting – Bathroom vanity lights often come with an integrated power outlet. This outlet lets you connect devices such as electric razors, without adding an extra electrical outlet in your bathroom. This can be a major convenience, especially if the bathroom is old and has limited electric outlets. You can install vanity lights and wall socket using the existing lighting wires from the old lighting. Shut off power to the circuit you want to work on at the breaker box for your home. It is extremely important that you never try to work on a live electrical circuit.
Place the mounting plate for vanity light on the wall in the location where you plan to install kichler bathroom vanity lighting. Screw the mounting plate to the wall with the supplied hardware and a screw driver, to ensure that the electrical wires to the easier routes through the opening in the center of the mounting plate. Remove 1/2-inch of insulation from the ends of the black and white wires of the electric wires by means of a set of wire strippers. Place the bare ends of the white line from the vanity lights and the white wire of the electric wire and slide along a wire nut over the ends of the wires. The wire nut twist until it is firmly fixed.
0 Photos Gallery of: Quick Kichler Bathroom Vanity Lighting Install
Then Wrap a 3-inch piece of electrical tape around the wires and wire nut for extra insurance. Electric wire along a wire and pinch nut over the ends of the wires. The wire nut twist until it is firmly fixed. Wrap a 3-inch piece of electrical tape around the wires and wire nut for extra insurance. Slide vanity light on the mounting plate. Most will be more protruding bolts, corresponding to the holes in the kichler bathroom vanity lighting. Line them up and push light on bolts. Placing the nuts is provided with vanity on the ends of bolts and tightens with the fingers. Turn on the power to the circuit back.